Which sizes are available for MD dryers?
The MD Series (Monotube) dryer is available in a variety of length and tubing sizes, and can be specified according to an intelligent product numbering system as shown in the table below. The dryer performance is dependent on the total amount of active surface area, so both the tubing diameter and the length affect performance. See the MD dryer page for more information.
| 1 – Series | | | MD (Monotube Dryer) Series | MD | 2 – Tubing Size
| | | 0.050″ Nafion™ Tubing | 050 | | 0.070″ Nafion™ Tubing | 070 | | 0.110″ Nafion™ Tubing | 110 | 3 – Dryer Lengths
| | | 12″ (30 cm) | 12 | | 24″ (60 cm) | 24 | | 48″ (120 cm) | 48 | | 72″ (180 cm) | 72 | | 96″ (240 cm) | 96 | | 144″ (360 cm) | 144 | | 288″ (720 cm) | 288 | | | 4 – Shell and Connector Material | | | Polypropylene (PP) | P | | Fluorocarbon (FEP / PVDF) | F | | FEP Shell, PP Connectors | FP | | Stainless Steel | S | | FEP Shell, Stainless Connectors | FS | | Element Only (for spare part) | E | | | | 5 – Connector / Spare Part Type | | Sample Gas Connector Type
| | | 1/16″ Compression (MD-050 only) | 1 | | 1/8″ Compression | 2 | | 1/4″ Compression | 4 | |