Product Documentation

MDH-Series Gas Dryer Setup

1 views 0

  1. Connect the 2 wires to the appropriate 110 VAC or 12 VDC power source and let the unit source and let the
  2. Secure sample inlet and outlet connections using insulated fitting for sample inlet
  3. Connect purge inlet and outlet fittings
  4. Start purge flow(purge air must be -40°C dew point air, nitrogen or other gas)
  5. Start sample flow. Sample must be maintained at constant temperature from its origin to prevent condensation

Download MDH-Series Gas Dryer User’s Manual

Was this helpful?