- Connect 110VAC /60Hz or 220VAC/ 50Hz to Heatless Dryer.
- Connect compressed air line with minimum of 60 psig and maximum of 100 psig to ¼” Compressed Air Inlet port (Refer to Figure 1). Coalescing oil/water pre-filter is recommended for installations where oil or water mist is present.
- Purge Air Exhaust ports should be left open to atmosphere to provide venting (can pipe to remote location if desired). An inexpensive particulate after-filter may be used on purge air exhaust to reduce noise.
- A 1/4” tubing should be used for connection to 1/4” Dry Air Outlet fitting. If length of tubing exceeds 15 meters, 3/8” tubing should be used.
Download HD-Series Heatless Dryer User’s Manual